How to use HEDP？

HEDP (1-Hydroxyethylene-1,1-diphosphonic acid) is a strong chelating agent and scale inhibitor widely used in water treatment applications, such as industrial cooling water systems, boilers, and oilfield applications. Here are some general instructions for using HEDP in water treatment:

HEDP should be added to water in the form of a solution to ensure adequate mixing. The solution can be prepared by dissolving HEDP powder in water or by diluting HEDP liquid concentrate with water.

The dosage of HEDP depends on the specific water conditions, including pH, hardness, temperature, and alkalinity. In general, the recommended dosage of HEDP ranges between 5-50 ppm (parts per million). However, it is crucial to consult with an experienced water treatment professional to determine the appropriate dosage for your specific water system.

HEDP can be added to the water system through different methods, depending on the application. For example, it can be metered into the water system using a chemical feed pump or injected directly into the water using a quill.

It is essential to monitor the water regularly to ensure that the desired water quality is achieved and maintained. This includes testing for pH, hardness, total dissolved solids (TDS), and other parameters.

Finally, it is important to handle HEDP safely and follow all safety guidelines. HEDP is corrosive and can cause skin and eye irritation, so protective equipment should be worn when handling it. Also, it should be stored in a cool, dry, well-ventilated area, away from incompatible materials and sources of ignition.

Please note that the above instructions are general guidelines only, and other factors may influence the use of HEDP in specific applications. Always consult with an experienced water treatment professional to determine the best practices for your specific water system.



http://www.krwater.com/01-HEDP.htm